NCAT Thermo Fisher (asphalt combustion furnace combustion method of asphalt content tester) test accuracy of up to 0.11% of asphalt content. This method also can provide clean aggregate for grading analysis.
Advantage
1, save time
The combustion method and solvent extraction were compared to save a lot of time, 1200~1800 g sample only 30~45 minutes, can accommodate up to 5000 grams of weight of sample.
Automatic monitoring of sample weight - built in the combustion process balance, balance accuracy is less than 0.1 grams.
24 - hour timer to control the combustion furnace in the work day begins to warm up before the test.
Automatic operation - the system, the staff can do other work in the equipment during operation.
- easy operation: only need to input the sample weight and calibration coefficient, load the sample, press the start button, hear a beep press stop button to complete the test.
2, economic benefits
The only standard of 20 amps, and similar products need to provide 40~50 amps.
The method does not require solvent recovery or combustion.
The high strength refractory material embedded electric heating plate can protect the electric wire to prolong its service life.
3, non-toxic and safe
- avoid the use of toxic solvents.
High temperature filter - unique patent system, using ceramic filters and high temperature afterburner can reduce exhaust emissions, and fixed on the furnace top, no need to install, the 14 "x 14" x 14 "combustion chamber has been fully applied.
- once opened the door, the door safety built-in lock automatically cut off the power supply of the heating unit.
The software will lock the door, open the door to prevent the heating process.
- 180 degrees to open the door to take the sample. The door hinge can prevent the open doors closing on their own.
<strong> technical specifications</strong>
WeChat
Micro-blog
All aspects of high-tech test solutions provider
